Daystar Pa70033 Lift Kit Body; Front Lift - 3 Inch, Rear Lift - 3 Inch,

Special Price $299.99 Regular Price $303.40
In stock
SKU
BKCGPA70033

Free Shipping

Provides 3 Inch Of Additional Lift Without Modifying Existing Suspension System,Allows Up To 32 Inch Tires And Use Of Factory Rims For Improved Ground Clearance ,Does Not Alter The OEM Suspension Geometry,Maintains The Factory Smooth Ride,Fiberglass Reinforced Nylon Body Blocks,CNC Machined And Zinc Plated Steering Extension,Laser Cut And Powder Coated Front And Rear Bumper Relocation Brackets,Laser Cut And Zinc Plated Fittings And Brackets,Limited Lifetime Warranty
More Information
SKU BKCGPA70033
UPC 618089007171
ASIN B01B4JWN7I
Brand Daystar
Classification Lift Kit-Body
MPN PA70033
Part Type Lift Kit-Body
Length 16.0000
Width 12.0000
Height 4.0000
Lift Kit-BodyBody Lift KitBody Lift Kit
3 in. Lift
Incl. Steering Extension
Frt/Rr Bmpr Brackets
Nec. To Drill Out Some Body Bushings To Accom. Lrgr. Bolts
SPECIFICATIONS:WARNING CA Proposition 65: YesWARNING CA Proposition 65 Message: (For California residents) Cancer and Reproductive Harm - www.P65Warnings.ca.govFEATURES:Other Parts Required For A Complete KitBrackets Are Laser Cut/Zinc PlatedFor Ultimate Corrosion ProtectionCustom Machined Splined Steering Shaft ExtensionsDoes Not Altar Factory Ride Or OEM GeometryAllows You To Increase Tire SizeFor Improved Ground Clearance/Rugged Good LooksLimited Lifetime WarrantyThe Performance Accessories Body Lift kit designed for this platform resulted in our bestselling Ford kit to date. The affordability of this kit results from the fact it augments the existing OEM suspension for both 2 Wheel Drive and 4 Wheel Drive vehicles by providing 3? of additional lift and allowing up to 32? tires. This is an ?easy to install? kit that comes with all necessary kit components to maintain the OEM lines. Included in this kit are heavy duty laser cut front and rear bumper relocation brackets, CNC machined and zinc plated steering extensions, laser cut and zinc plated radiator relocation brackets, zinc plated square bed support channel, High Strength fastener hardware, and of course our industry renowned Fiber-Glass reinforced Nylon body blocks. (Manual Transmission Requires PN-3700). A set of urethane wheel-well extensions (Gap-Guards 2WD PN-6737) or (Gap-Guards 2WD Splash Only PN-6733) or (Gap-Guards 4WD PN-6732) are available separately, and are used to conceal any gaps between the body and frame. This system can be installed in 5 to 6 hours and comes complete with everything necessary for installation. Benefits: Provides 3? additional lift without modifying existing suspension system. Allows up to 32? tires and use of factory rims for improved ground clearance. (33? with bumper valance trimmed). DOES NOT alter the OEM suspension geometry. Maintains the superior Factory ride. Keeps center of gravity lower than comparable Suspension lift. Features: Fiber-Glass reinforced Nylon body blocks CNC machined and zinc plated steering extensions Heavy Duty Bumper relocation brackets to maintain OEM look Laser cut and Powder Coated Front and Rear Bumper relocation brackets Laser cut and Zinc Plated fittings and brackets High Strength fastener kitsDaystar has been Designing and Producing Precision Plastic Components for Four Wheel Drive Trucks, Motocross Bikes, Passenger Cars, and Mountain Bikes since 1977. We produce millions of plastic injection molded parts every year on micro processor controlled Van Dorn molding machines ranging in size from 85 to 400 tons. The design and production of elastomeric boots or bellows is a Daystar specialty. We have developed proprietary design software, specialized injection molding bases, special purpose robotics, and unique boring and turning tools that enable us to provide the optimum boot solution to our customer at unrivaled tooling and piece part prices. Daystar is a recognized specialist in manufacturing cast polyurethane elastomeric and microcellular foam parts for the automotive industry. We have developed several families of proprietary polymer formulations that give us the ability to match material properties to the specific application at hand. Engineering excellence is not just a catch phrase at Daystar - it is the foundation of our company. Daystar engineers can execute all aspects of the design process for part modeling and simulation to multi axis toolpath creation. Daystar has been producing high quality injection molds for over 30 years ranging in sophistication from single cavity prototype molds to multicavity molds with hot runners and side actions. Our production facility includes multiple dispensing lines, a clean room for steel preparation for bonding operations, several custom designed automatic parts trimmers, a laboratory for testing part designs and material properties, and most importantly, a skilled team with a proven track record.
Write Your Own Review
You're reviewing:Daystar Pa70033 Lift Kit Body; Front Lift - 3 Inch, Rear Lift - 3 Inch,
Your Rating
Copyright © 2019 Shopeddies. All rights reserved.