Daystar Pa112 Pa10132 Lift Kit Body; Front Lift - 2 Inch, Rear Lift - 2 Inch,

Special Price $269.99 Regular Price $314.32
In stock
SKU
BKCGPA112

Free Shipping

Provides 2 Inch Of Additional Lift Without Modifying Existing Suspension System,Allows Up To 32 Inch Tires And Use Of Factory Rims For Improved Ground Clearance,Does Not Alter The OEM Suspension Geometry,Maintains The Superior Factory Ride,Fiberglass Reinforced Nylon Body Blocks,CNC Machined And Zinc Plated 1018 Steel Steering Extensions,Laser Cut And Powder Coated Relocation Brackets,Laser Cut And Zinc Plated Fittings And Brackets,Heavy Duty Bumper Relocation Brackets To Maintain OEM Look. High Strength Fastener Kits,Limited Lifetime Warranty
More Information
SKU BKCGPA112
UPC 618089005665
ASIN B01B4XN8U0
Brand Daystar
Classification Lift Kit-Body
MPN PA112
Part Type Lift Kit-Body
Length 16.0000
Width 12.0000
Height 4.0000
Lift Kit-BodyBody Lift KitBody Lift Kit
2 in. Lift
Incl. Steering Extension
Front Bumper Brackets
SPECIFICATIONS:WARNING CA Proposition 65: YesWARNING CA Proposition 65 Message: (For California residents) Cancer and Reproductive Harm - www.P65Warnings.ca.govFEATURES:Other Parts Required For A Complete KitGrade 5 Zinc Plated HardwareHigh Grade Reinforced Nylon Lift BlocksCustom Machined Splined Steering Shaft ExtensionsBrackets Will Not RustState Of The Art CNC EquipmentTrouble-Free InstallationLimited Lifetime WarrantyThe Performance Accessories #112 Body Lift Kit set the standard high for Body Lift quality. The 1995-1998 Chevrolet and General Motor ? ton & ? ton Trucks were built with rock solid OEM suspensions. This kit augments the existing OEM setup for both 2 Wheel Drive and 4 Wheel Drive vehicles by providing 2? of additional lift and allowing up to 32? tires. This is an easy to install kit that comes with all the fixtures and brackets to maintain the OEM lines. Included in this kit are 3/16? thick laser cut and powder coated bumper relocation brackets* (*front only), CNC machined and Zinc plated 1018 steel steering extensions, laser cut and zinc plated radiator relocation brackets, zinc plated square frame channel, High Strength fastener hardware, Fuel Filler Extension, and of course our industry renowned Fiber-Glass reinforced Nylon body blocks. Optional rear bumper brackets are available PN-10003. A set of urethane wheel-well extensions (Gap Guards Fleet Side 2WD PN-6529) ,(Gap Guards Fleet Side 4WD PN-6530), (Gap Guards Step Side 2WD PN-6528), or (Gap Guards Step Side 4WD PN-6531) are available separately, and are used to conceal any gaps between the body and frame. This system can be installed in 6-7 hours and comes complete with everything necessary for installation. Benefits: Provides 2? additional lift without modifying existing suspension system. Allows up to 32? tires and use of factory rims for improved ground clearance. DOES NOT alter the OEM suspension geometry. Maintains the superior Factory ride. Keeps center of gravity lower than comparable Suspension lift. Features: Fiber-Glass reinforced Nylon body blocks CNC machined and zinc plated 1018 steel steering extensions Heavy Duty Bumper relocation brackets* to maintain OEM look (*front only) Laser cut and Powder Coated relocation brackets Laser cut and Zinc Plated fittings and brackets High Strength fastener kitsDaystar has been Designing and Producing Precision Plastic Components for Four Wheel Drive Trucks, Motocross Bikes, Passenger Cars, and Mountain Bikes since 1977. We produce millions of plastic injection molded parts every year on micro processor controlled Van Dorn molding machines ranging in size from 85 to 400 tons. The design and production of elastomeric boots or bellows is a Daystar specialty. We have developed proprietary design software, specialized injection molding bases, special purpose robotics, and unique boring and turning tools that enable us to provide the optimum boot solution to our customer at unrivaled tooling and piece part prices. Daystar is a recognized specialist in manufacturing cast polyurethane elastomeric and microcellular foam parts for the automotive industry. We have developed several families of proprietary polymer formulations that give us the ability to match material properties to the specific application at hand. Engineering excellence is not just a catch phrase at Daystar - it is the foundation of our company. Daystar engineers can execute all aspects of the design process for part modeling and simulation to multi axis toolpath creation. Daystar has been producing high quality injection molds for over 30 years ranging in sophistication from single cavity prototype molds to multicavity molds with hot runners and side actions. Our production facility includes multiple dispensing lines, a clean room for steel preparation for bonding operations, several custom designed automatic parts trimmers, a laboratory for testing part designs and material properties, and most importantly, a skilled team with a proven track record.
Write Your Own Review
You're reviewing:Daystar Pa112 Pa10132 Lift Kit Body; Front Lift - 2 Inch, Rear Lift - 2 Inch,
Your Rating
Copyright © 2019 Shopeddies. All rights reserved.